We get asked if all Arduino hardware was or is open-source hardware since Arduino has been historically been open-source, and “open-source” is part of the “About Arduino” page and mission. If there is a change in direction and/or if closed source hardware is shipping now from Arduino, what does that mean for makers, engineers, and the open-source contributors to Arduino?
The Arduino Pro Hardware (Portenta H7) is not open-source hardware. We asked Arduino about it as the page for the Arduino product(s) says OSH and open-source, but there were no downloadable board files. Arduino has previously published and publishes board files for their open source hardware. This is a departure from the Arduino statement and what we all know them for “All Arduino boards are completely open-source, empowering users to build them independently and eventually adapt them to their particular needs.”
Here are the specifics directly from Arduino. Thank you again, Alessandro:
“Arduino Pro is a line of products for industrial control, robotics and other professional applications which is described in a separate website at https://www.arduino.cc/pro/ . They are sophisticated boards which are designed and manufactured to work in critical environments, like the Portenta H7, and they require a lot of technology in the manufacturing process. At least for an initial period, we want to prevent counterfeiters from blindly downloading a file and manufacturing it without any R&D effort or contribution to the community, because the result of that will be tens or hundreds of low-quality clones which do not have nearly the quality of ours, and no benefit for the community. This would confuse users and prevent these products from being successful, because their value is not just in their circuit design but also in their quality. These are not boards that one could manufacture at home or in a makerspace.
This is why for them we chose the same approach as Raspberry Pi: we publish schematics so that anyone can learn from them, and we keep the entire software stack completely open source. But at least for now, Altium files are available only upon request so that we can check whether someone can actually manufacture them with the required quality. We still wanted to publish an interactive web viewer from which design files can be viewed.
We strongly believe in Open Source Hardware since our origins (we sponsored the last OSHWA Summit too ❤️) and all the old and new products for our maker community are not only open-source hardware, but also fully compliant with the OSHW definition, because we love the idea that other people can improve them or contribute ideas, and even create new derived products. In this case, we’re waiting a bit before making the CAD files available for download; our approach is still pretty open but we acknowledge this doesn’t fully match the open source hardware definition written by OSHWA, so to remove any confusion we’re making sure the “OSH” word is not included in the Portenta page.”
Head of Maker Business, Open Source & Community
Historically, Arduino published the editable board files in whatever format they were created in. The Arduino founders signed the community-made open source hardware definition as well, which states downloadable files are needed for it to be open-source hardware.
There are no editable or downloadable file for the Portenta board(s). There is an Altium “viewer” that has an encrypted file, and the Portenta pages says “study” vs “build”. Arduino has said as of 7/7/2021 they will update the page(s) for the Portenta to remove OSH since it’s not open-source.
Update – 7/7/2021 – Hacker News discussion here.
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Maker Business — Over 500,000 manufacturing jobs are going unfilled
Wearables — Authenticity vs. comfort
Electronics — Function Generator Marketing
Python for Microcontrollers — Python on Microcontrollers Newsletter: 2500 Adafruit Guides and much more! #Python #Adafruit #CircuitPython @micropython @ThePSF
Adafruit IoT Monthly — Smart Agriculture, an E-Ink Newspaper, and more!
Microsoft MakeCode — Bring Coding to your Classroom with Microsoft MakeCode!
EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey
New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — JP’s Product Pick of the Week — 4pm Eastern TODAY! 7/6/21 @adafruit @johnedgarpark #adafruit #newproductpick
Get the only spam-free daily newsletter about wearables, running a “maker business”, electronic tips and more! Subscribe at AdafruitDaily.com !
No comments yet.
Sorry, the comment form is closed at this time.